Details
NEW! Tanks-Inc Walbro GPA Series Fuel Pump Assembly
up to 450 horsepower, 190 Liters per hour
Made in the USA
Heavy 10 gauge no-warp mounting plate
1/4" NPT Supply and Return Line
Barbed Vent Fitting
Oven brazed fittings
Up to 100 PSI
In-tank wire harness
Genuine Walbro Fuel Pumps
The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.
We use Walbro high-performance pumps in all of our fuel injection modules. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)
The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.
For information on using this pump assembly on a carbureted application click here.