Details
To make sure you receive your package, all items $500 and over are sent signature required
Made in the USA!
RET-2001-S: 3- Hole RetroTech Digital Instrument VFD3 System without Wings
Available with Wing's or without
Please see our other items for with Wings
Dakota Digital Series III instrument systems offer the latest technologies and features for your custom vehicle. High brightness vacuum fluorescent displays provide a lifetime of trouble free use while offering increased accuracy and features!
Unit Dimensions:
5-7/8" x 23-7/8" W with Wings
5-7/8" x 12-1/4" W without Wings
- Standard Features:
- Speedometer
- Tachometer
- Oil Pressure
- Water Temp
- Voltmeter
- Fuel Level
- Various Indicators
- Performance Displays
The VFD Series utilizes an outboard control module which offers several benefits, the most important being simplicity. Instead of bringing bundles of wiring directly to the instruments, it will be routed to the control module (measuring 5.5" x 4.5" X 1") which can be tucked away or centralized in a convenient under-dash location. A single ribbon cable connects the display to the control module, eliminating clutter and providing simplified connections. On-board diagnostics provide simplified troubleshooting, while terminal strips provide secure wire termination.
The VFD Series now includes laboratory-grade solid state sensors for tremendous accuracy, as well as 12' harnesses with weather-tight connections to make installation a snap. Included speed sensor easily converts mechanical speedometer cable into electric when necessary. Oil pressure and water temp sensors contain 1/8" NPT sensors, as well as bushings to convert to 1/4", 3/8", 1/2" NPT, in addition to 12mm and 16mm varieties for late-model GM applications. Two pushbutton switches also enclosed allow for initial setup and scrolling through Message Center displays.
- Displays included with this instrument system: Speedometer (0-255 MPH or KPH), Tachometer, Oil Pressure, Water Temp, Voltmeter, Fuel Level.
- Also shown is: Odometer, Trip Odometer, Resettable Service Odometer and Hourmeter.
- Several performance calculations include: 0-60 MPH (0-100 KPH) timer, mile timer, mile speed display, High Speed recall and High RPM recall.
- Various Indicators can also be displayed such as: Turn Signals, High Beam, Check Engine, Parking Brake, Cruise Control, 4x4 (when equipped), Wait to Start (when equipped).
- Automatic Transmission gear indicator is also included which will display the full name (ie: Park, Overdrive, etc.) of the current gear. Utilizing the gear position indicator will require the use of a Dakota Digital
- Fuel level gauge can read either OEM sensor, or any aftermarket style currently available. A universal fuel level sender, SEN-06-1, can be purchased if necessary (see our other items).
- Fully programmable speedometer for various tire sizes, rear-end gearing combinations, etc.
- Built-in dimmer will reduce the display intensity as headlights/ parking lights are activated.
- Fully adjustable warning points alert the user of potential vehicle problems.
- One-time user settable odometer. This is available only within the first 100 miles of operation. Once exceeded, the mileage can be reset by Dakota Digital at a charge of $20. (see our other items)
- Fuel level gauge can read either OEM sensor, or any aftermarket style currently available. A universal fuel level sender, SEN-06-1, can be purchased if necessary (see our other items).
Covered by a Limited Lifetime Warranty!