Tanks inc. 63-67 Corvette EFI Gas Tank Kit w/ 400LPH Pump & 3 Wire Sender

Tanks inc. 63-67 Corvette EFI Gas Tank Kit w/ 400LPH Pump & 3 Wire Sender TM33A-T-KIT6

Kit Contents:

TM33A-T: 1963-67 Corvette Fuel Injection Gas Tank
GPA-6: High Flow In-Tank Fuel Pump Module - GPA-Series
TAN-C2-9: 1963-67 Corvette 3 Wire Fuel Sending Unit

-----------------------------------------------------------------------------------------------

TM33A-T: 1963-67 Corvette Fuel Injection Gas Tank

• 1963-1967 Chevy Corvette EFI Fuel Tank
• Fuel Injection Ready!
• Utilizes our GPA series fuel pumps, available in sizes from 109 to 450 liters per hour.
  Uses aftermarket 5-bolt senders.  Multiple Ohm ranges available to work with aftermarket gauges. If using tube sender length is 9". 
• If you are using the factory 1963-1967 Corvette gauges you must use fuel sender part # TAN-C2-9.
• EFI style internal baffling with extra large 4.8 liter dual tube baffled fuel tray to prevent fuel pump starvation.
• Perfect for your Pro-Touring, Autocross or Road Racing Ride
• Fuel pump and sender are recessed in the tank for easy installation with no modification needed to your car.
• Looks like an OE tank when installed.
• Mounting Straps are included.
• Coated galvanized steel then Powder Coated Silver.
• 18 Gallon Capacity
• Size is: 38" x 15-3/4" x 11-3/4"

GPA-6: High Flow In-Tank Fuel Pump Module - GPA-Series

Turbine Style High Flow GPA Series Fuel Pumps

• Made in the USA
• Heavy 10 gauge no-warp mounting plate
• 1/4" NPT Supply and Return Line
• Barbed Vent Fitting
• Oven brazed fittings
• Up to 100 PSI
• In-tank wire harness
• Genuine Walbro High Flow High Horsepower Fuel Pumps
• Powerful & Quiet Operating DCSS 39/50 Turbine Pumps
• Pumps can be controlled by Pulse Width Modulation

The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.

We use Walbro high-performance pumps in all of our fuel injection modules.  Walbro (TI Automotive) is an OE validated pump manufacturer that supplies products for two-thirds of the vehicles produced around the world today.  Based on our testing we believe that Walbro offers the highest quality pump on the market.  These patented design dual channel deep pocket pumps produce high flow volumes at unparalleled efficiency that is better at hot fuel handling and recovery from aeration compared to other pump manufacturers.  We offer multiple flow ranges in order to supply up to 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)

The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connectors.  It is yellow-zinc plated to prevent corrosion.

These pumps are not compatible with the 1968-72 GM-A Body stock sized (non-notched) EFI Gas tanks.

TAN-C2-9: 1963-67 Corvette 3 Wire Fuel Sending Unit