Details
Billet Aluminum Ford Small Block V-Belt Pulley Kit (4 Bolt)
Designed for use with CVF Racing Alternator Bracket or OEM Bracket with 1.5" spacer between alternator and cylinder head (as apposed to 2.5" spacer).
Fits vehicles with:
- Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
- Water Pump with Driver's side lower radiator hose.
- Dampener face to water pump flange face 3 1/4"
- CVF Racing Alternator Bracket or OEM Bracket with 1.5" spacer
Kit Includes:
- One Groove Crank Shaft Pulley
- One Groove Water Pump Pulley
- One Groove Alternator Pulley
Note: This kit is designed to work with CVF Racing Alternator Bracket or the OEM bracket with 1.5" spacer between the alternator and cylinder head. If you have the OEM bracket with 2.5" spacer you will want to run SBFL1KIT (or SBFL1WP-A & SBFL1CR if ordering separately). This is because there are two mounting locations for the Ford Alternator depending on what accessories you are running. Our brackets are designed for the "Power Steering" location which is closer to the engine than the "Alternator Only" location.
289, 302 & 351W Engines
- 1969 1/2+ Ford passenger cars
- 1977+ Ford trucks
- CVF Racing Alternator Bracket or OEM Bracket with 1.5" spacer
Fits the following models with original 289, 302 & 351W small block engines installed. Note: 1969 model year was a transition year for small blocks and you need to check your water pump and number of bolts on crank pulley.
- 1969 - 1985 Ford Mustang
- 1974 - 1978 Ford Mustang II
- 1972 - 1975 Gran Torino
- 1969 - 1974 Ford Galaxie 500
- 1969 - 1970 Ford Fairlane
- 1962 - 1970 Ford Falcon
- 1969 - 1985 Ford Thunderbird
- 1977 - 1979 Ford Ranchero
- 1977 - 1985 Ford Bronco
- 1977 - 1985 Ford F-150
- 1977 - 1985 Ford F-250
- 1977 - 1985 Ford F-350
This is not a complete list. If you have a question about application, please e-mail us. It is not recommended that you select small block pulleys based on model and year alone because often the original engine has been swapped. The over-riding factor in selecting the right Ford small block pulleys should be which side the lower radiator hose is on and number of crank pulley bolts